CM1-200 Cutting/Punching/Bending Machine for copper busbars up to 200mm
Consult the table of machine and tooling products:
A production machine for 3 applications :
CUTTING
Die and blade for cutting rigid bars of, up to 200X10 mm.
Die and blade for cutting flexible busbars of, up to 200X10 mm.
PUNCHING
For flexible and rigid bars
of up to 10 mm thick.
Punches with centring pin
Standard dimensions :
Diameter 5-6-7-8-9-10-11-12-13-14-15-16
Oblongs 5-6-7-8-9-10-11-12-13 X 16 mm
BENDING
For rigid bars of up to 125X10 mm.
Accurate folding angle adjustement by reading from the ruler and centring pin
integrated into the folding V-die.
Technical characteristics
- Power : 12 metric tons
- Max. pressure : 160 bar
- Power Pack CME 240V, single phase motor 1.1KW
- Head weight : 160 KG
- WxHxT : 475x260x650 mm
RELATED PRODUCTS
- Combined shearer CM1-125
- Hydraulic Folder PH1-160
- Hydraulic Folding Machine PH1-125
- Electro-hydraulic power pack CME
- Combo CM1+PH1 on bench
- Duo CM1+PH1 on bench
CM1-200
DESCRIPTION | REFERENCES |
HYDRAULIC HEAD : | CM1-200 |
Without tools, double acting cylinder, electric stop for bending, maximum busbar size: 200x10 mm |
|
END STOP X/Y : | GXY-200 |
For production, X=0-125mm. Y=0-1000mm. | |
HYDRAULIC UNIT : | CME |
On movable frame , tank with15 liters of oil, 160 bars, 240 volts, 2 electrical footswitches for double acting cylinder. |
|
CUTTING TOOLS FOR COPPER AND ALUMIMIUM BUSBARS : | |
Die 200 x 10 maxi | CBS1-200 |
Blade 200 x 10 maxi | LR1-200 |
CUTTING TOOLS FOR LAMINATED/INSULATED BUSBARS : | |
Die 125X10 maxi | MBS1-200 |
Blade 125X10 maxi | LS1-200 |
PUNCHING TOOLS FOR BUSBARS : | |
Round dies holder | GM1-200 |
Oblongs dies holder | GMO-200 |
SET DIE/STRIPPER/PUNCH WITH CENTER PIN : | |
Round punches | |
For 4 to 6 mm thickness Busbars : | |
Ø7 | PMD7 |
Ø8 | PMD8 |
Ø9 | PMD9 |
Ø10 | PMD10 |
Ø11 | PMD11 |
Ø12 | PMD12 |
Ø13 | PMD13 |
Ø14 | PMD14 |
Ø15 | PMD15 |
Ø16 | PMD16 |
For 10 mm thickness Busbars : (only the die, punch is the same as 4/6 mm th.) | |
Ø7 | M107 |
Ø8 | M108 |
Ø9 | M109 |
Ø10 | M1010 |
Ø11 | M1011 |
Ø12 | M1012 |
Ø13 | M1013 |
Ø14 | M1014 |
Ø15 | M1015 |
Ø16 | M1016 |
Oblong punches : | |
For 4 to 6 mm thickness Busbars : | |
7x16 | PMD7X16 |
9x16 | PMD9X16 |
11x16 | PMD11X16 |
13x16 | PMD13X16 |
For 10 mm thickness Busbars : (only the die, punch is the same as 4/6 mm th.) | |
7X16 | MO10 7X16 |
9x16 | MO10 9X16 |
11x16 | MO10 11X16 |
13x16 | MO10 13X16 |
BENDING TOOL : | |
Busbars up to 200x10 . Smallest Z-bending : 55 mm | OP1-200 |