CT2-M
Consult the table of machine and tooling products:
This machine is very simple to use : the retractable centring pin integrated into each punch makes for quick, safe punching.
The articulated arms with castors effortlessly moves the doors (up to 1000X2000 mm) within the frame overhang.
A guide rule available as an option makes it possible to line up the rows of holes or the rectangular cut-outs by nibbling.
Technical characteristics
- Weight : 110 KG
- Depth of the frame overhang : 510 mm
- Punching capacity :
2 mm max. on steel for diameters of from 5 to 22.5 mm
and square of 45.3X45.3 mm
1.5mm. for diameters of from 25.5 to 60
1.2 mm max. on stainless steel
4 mm in plastic or polyester
For higher capacities, see electro-hydraulic versions CT2H-125 and CT2H-63.5
- Conversion kit to CT2H-125 or CT2H-63.5 available.
RELATED PRODUCTS
- CT2-H125 electro-hydraulic punching machine
- CT2-H electro-hydraulic punching machine
- round and rectangular punches for standard steel
- round and rectangular punches for stainless steel
- "non-standard" round and rectangular punches
- manual hydraulic pump and cutter sets for tristar steel
- manual hydraulic pump and cutter sets for stainless steel tristar plus
- portable hydraulic pump for akku punch
- punching cylinder for punching machines with hydraulic foot pump
- hole saw
Punch dies Ø 23 to 63.5 and rectangles up to 60x60:
| PUNCH | FOR | REFERENCE |
| ROUND PUNCHING : | ||
| Ø25,5 | ISO 25 | PMR25,5 |
| Ø28,3 | PG 21 | PMR28,3 |
| Ø30.5 | PMR30.5 | |
| Ø32,5 | ISO 32 | PMR32,5 |
| Ø33 | PMR33 | |
| Ø34 | PMR34 | |
| Ø37 | PG 29 | PMR37 |
| Ø40,5 | ISO 40 | PMR40.5 |
| Ø41,5 | PMR41.5 | |
| Ø43 | PMR43 | |
| Ø44 | PMR44 | |
| Ø47 | PG 36 | PMR47 |
| Ø50,5 | ISO 50 | PMR50,5 |
| Ø54 | PG 42 | PMR54 |
| Ø56 | PMR56 | |
| Ø60 | PG 48 | PMR60 |
| Ø63,5 MAXI | ISO 63 | PMR63,5 |
| SQUARE AND RECTANGULAR PUNCHING : | ||
| 15X15 | PMC15X15 | |
| 16,1X13,5 | PMC16,1X13,5 | |
| 18X12 | PMC18X12 | |
| 20X20 | PMC20X20 | |
| 22X22 | PMC22X22 | |
| 25X7 OBLONG | 6mm screw | PMC25x7 |
| 30X22 | PMC30X22 | |
| 33X15 | PMC33X15 | |
| 33X20,3 | PMC33X20,3 | |
| 34X21,5 | PMC34X21,5 | |
| 35X10 | PMC35X10 | |
| 35X35 | HARTING PLUG | PMC35X35 |
| 36,5X21,5 | PMC36,5X21,5 | |
| 36X26 | PMC36X26 | |
| 36X36 | PMC36X36 | |
| 40X30 | 67,5x 30 | PMC40X30 |
| 40X40 | PMC40X40 | |
| 45X29 | 71 x 29 | PMC45X29 |
| 45,3X 22,2 | DIN 48 x 24 | PMC45,3X22,2 |
| 45,3X 45,3 | DIN 48 x 48 and more | PMC45,3X45,3 |
| 46X36 | PMC46X36 | |
| 47X36 | PMC47X36 | |
| 50X14 | PMC50X14 | |
| 50X25 | PMC50X25 | |
| 50X37 | PMC50X37 | |
| 50X44,5 | PMC50X44,5 | |
| 58,5X 58,5 maximum | special | PMCS |
| 9 pins | Sub-D 9 pins | PMSD9 |
| 15 pins | Sub-D 15 pins | PMSD15 |
| 25 pins | Sub-D 925 pins | PMSD25 |
| 37 pins | Sub-D 37 pins | PMSD37 |
| SET OF BLADES AND DIES : | ||
| Set of blade, blade holder and die for 30x5 slot | LD30 | |
| Set of blade, blade holder and die for 45.5x5 slot | LD45 | |
| Set of blade, blade holder and die for 60x5 slot | LD60 | |
| BUTTONHOLE SHAPE : | ||
| Set of punch+die D6,5x D12 | PMBS12X6,5 | |
| Set of punch+die D7x D15 | PMBS15X7 | |
| FOR LOCK : | ||
| D22,5X20,1 | PMRS22,5X20,1 | |
| D22,5X18,5 | PMRS22,5X18,5 | |
| D22,5X21,2 | PMRS22,5X21,2 | |
| D17XD10 X33.3 | PMBS17X10 | |
Ø3 to 22.5 punch-dies
| PUNCH | FOR | REFERENCE |
| Ø4,2 | PMR4.2 | |
| Ø5 | PMR5 | |
| Ø5.2 | PMR5.2 | |
| Ø6.2 | PMR6.2 | |
| Ø6,5 | PMR6.5 | |
| Ø7 | PMR7 | |
| Ø7.2 | PMR7.2 | |
| Ø7.5 | PMR7.5 | |
| Ø8 | LED | PMR8 |
| Ø8,2 | LED | PMR8,2 |
| Ø9 | PMR9 | |
| Ø9.5 | PMR9.5 | |
| Ø10 | PMR10 | |
| Ø10,2 | PMR10,2 | |
| Ø10.5 | PMR10.5 | |
| Ø12 | PMR12 | |
| Ø12,2 | LED/ISO 12 | PMR12,2 |
| Ø12,7 | PG7 | PMR12,7 |
| Ø13.5 | PMR13.5 | |
| Ø14,5 | PMR14,5 | |
| Ø15,2 | PG9 | PMR15,2 |
| Ø16 | PMR16 | |
| Ø16.2 | PMR16.2 | |
| Ø16,5 | ISO 16 | PMR16,5 |
| Ø17,5 | PMR17,5 | |
| Ø18,6 | PG11 | PMR18,6 |
| Ø20 | PMR20 | |
| Ø20,4 | PG13/ISO 20 | PMR20,4 |
| Ø21 | PMR21 | |
| Ø22,5 | PG16 | PMR22,5 |
| 20X3 blade+blade holder+die | LD20 | |
| 8,7X8,7 | PMC8,7X8,7 | |
| Ø 23 maximum | special | PMRS |
SPARE PARTS
| DESIGNATION | REFERENCE |
| CT2 MANUAL PUNCHING MACHINE | |
|
250 mm deep gooseneck, to be fixed to a workbench (2 fixing plates are supplied with the machine), with operating arm, stripping system (to remove the punch from the punched sheet metal). |
CT2-250 |
|
CT2 MANUAL PUNCHING MACHINE |
|
|
500 mm deep swan neck, to be fixed to a workbench (2 fixing brackets are supplied with the machine), with operating arm, stripping system (to extract the punch from the punched sheet metal), machine can be converted to hydraulic CT2-M |
CT2-M |
|
DIE HOLDER TABLES: (essential, to be chosen according to the punching diameters) |
|
|
30 DIES HOLDER TABLE: for dies with diameters from 3 to 22.5 mm |
TPM30 |
|
80-DIAMETER DIE TABLE: for dies with a diameter of 25.5 to 60 and squares up to 50x50 |
TPM80 |
|
ACCESSORIES |
|
|
WHEELED SUPPORT FOR DOORS (essential for large doors) |
SRP |
|
1m GUIDE RULER FOR CT2-MANUAL (for aligning holes and rectangular cut-outs) |
RG |
|
STORAGE PANEL FOR TOOLS |
CRO |
|
BASE FOR MANUAL PUNCHING MACHINE |
SRCT2 |